Installation of the water connection to the ice maker must be completed by a qualified service technician or a qualified plumber (see installation instructions).The location of the appliance should allow the footprint width and depth of the refrigerator, its height from the bottom edge to the top, and the door swing or drawer depth into the walkway in front of the refrigerator.
Ensure the ice maker is connected to the filter and to a drinkable water supply only.
If such discolouration is noted, discard the ice cubes and contact your Fisher & Paykel Authorised Repairer.
Do not use ice cubes that may have become discoloured, usually with a green-blue colour.
Avoid contact with the moving parts of the ice maker ejector mechanism, and do not place your fingers on the automatic ice making mechanism while the refrigerator is in operation.
Dry thoroughly and place back into the correct position. Empty the ice storage bin periodically and wash in lukewarm water.
If ice is not used often, old cubes will become cloudy, taste stale, will shrink and may stick together.
For maximum ice storage, level the stored cubes with the ice scoop.
If large amounts of ice are required, remove an ice storage bin and allow ice to fill the top freezer bin.
*Dependent on your current temperature settings. This function automatically deactivates after 24 hours.
When the ‘Ice Boost’ function is activated, ice production will increase up to 30%* from standard ice making.
Ice making will continue until the storage bin is full, and only resume once you start to use the stored ice.
When cubes are frozen, they will be dispensed from the ice tray and into the ice storage bin below.
The ice cube tray will fill with filtered water.
Your automatic ice maker will produce approximately eight cubes of ice every 3 – 4 hours, depending on the freezer compartment temperature and the number of door openings.
This scoop provides hygienic access to clean, clear ice cubes.
Your Ice & Water product comes with a ice storage bin located inside the top freezer bin, and a hygienic scoop for ice.
Information about your automatic ice maker Ice storage bin and scoop in correct position
The ice storage bin is to be removed for a period of time, orĮ402B, E442B, E522B, RF402B, RF442B, RF522A, RF522W and RF522B.
The water supply is to be off for several hours, or.
We recommend that you turn the ice maker off if:.
We recommend that you also do this after vacations or extended periods of not using ice. This will flush away any impurities in the water line and ensure that you get the best quality ice.
Once your ice maker is in operation, discard the first 3 harvests of ice (8 ice cubes are produced per harvest).
When the bin is inserted correctly the scoop will be on the right hand side of the bin or at the front of the bin.
#Samsung quick connect auto ice maker water line full
If the bin is full of ice, inserted incorrectly or if all bins are removed, the ice maker will not operate.
Empty the water and correctly replace the bin, ensuring the scoop is located at the front of the bin.
Force another cycle, this step helps remove any manufacturing and transportation dust in the ice tray.
The ice tray will flip only after the doors are closed. The ice tray will flip twice and empty the water into the bin below.
Press and hold, and buttons together for 4 seconds then close the door(s).
The light above the ICE ON/OFF icon will be illuminated when the ice maker is on.
To turn your ice maker on press the button.
When you first turn your refrigerator on after installation, the ice maker will be off.